Produktpalette
Kontakt
Adresse：Gebäude 1, North Zone, Zhongke Innovation Industrial Park, Jing District, Weihai City
50 Axis 8-4096 Circle Mechanical Multi Circle
This product uses permanent magnets and magnetic induction elements. After magnetoelectric conversion, the angular displacement of the shaft is converted into an electrical pulse signal for output. It can be widely used in various automatic control and measurement fields, such as machinery manufacturing, shipbuilding, textile, printing, aviation, military industry, testing machines, elevators, etc.
Klassifizierung:
Schlüsselwörter:
Produkte
▋ ADK-economical absolute encoder
● Product description
Model：ADK-A50L8-A4096G4RCN
This product uses permanent magnets and magnetic induction elements. After magnetoelectric conversion, the angular displacement of the shaft is converted into an electrical pulse signal for output. It can be widely used in various automatic control and measurement fields, such as machinery manufacturing, shipbuilding, textile, printing, aviation, military industry, testing machines, elevators, etc.
This product has the characteristics of anti-vibration, corrosion resistance, pollution resistance, small size, low cost, high reliability, simple structure, etc. The internal use of ASIC devices, high reliability, long life, strong anti-interference performance, technical level is the domestic priority.
Model description: tighten the screw hole installation, the main body size is φ50mm, the axis is φ8, the cable is side-out, the resolution is 4096, the gray code negative logic is output in parallel, and the working voltage is DC8-29V.
● Waveform
Note: The absolute parallel output encoder divides the circumference into corresponding equal intervals evenly according to the required accuracy, and each interval is represented by a code combination with a fixed signal of several bits, so that the encoder can still remember the absolute operation of the encoder after the power is turned off. position. If 1024 lines are required, a combination of ten signal lines is required, namely:
0: Gray code is 00000000000
1024: Gray code is 11000000000 (the above is positive logic, negative logic is the opposite)
▋ Technical Parameters
● Wiring table
| Lead color | Output signal (NPN collector output) |
| Red | Vcc |
| Black | GND |
| Shielded wire | Shielded wire |
| White | D0 |
| Gray | D1 |
| Yellow | D2 |
| Brown | D3 |
| Pink | D4 |
| Purple | D5 |
| Orange | D6 |
| Blue | D7 |
| Green | D8 |
| Light blue | D9 |
| Light green | D10 |
| Dark green | D11 |
☉ Note: The definition of encoder wiring is subject to the label on the housing
● Environmental parameters
| Operating temperature | -40～85℃ |
| Working humidity | 98% Max |
| Protection level | IP54 |
| Anti-magnetic interference | Common mode magnetic field suppression |
● Electrical parameters
| Resolution | 4096 |
| Operating Voltage | DC 8~29V |
| Working current | 500mA max |
| Output form | NPN open collector |
| Response frequency | 2MHz |
| Output current | 25mA Max |
● Mechanical parameters
| Starting torque (N·M) | 1.5x 10^(-3) |
| Moment of inertia (Kg·m²) | 9.0x 10^(-8) |
| Max shaft load | 200N (axial)/100N (radial) |
| Max speed r/min | 3000 |
▋ Electrical parameters and output description
● Long line drive output
● Voltage output
● Open collector output
● Level logic
The encoder output logic includes two types: positive logic and negative logic:
☉ If the opposite logic is required, the signal can be inverted and counted by software or hardware at the receiving end, and the logic output form can also be specified when ordering.
● Output example
▋ Precautions
○ An elastic soft connection is adopted between the encoder shaft and the output shaft of the user end to avoid damage to the shaft system of the encoder due to the string movement and beating of the user shaft.
○ Please pay attention to the allowable shaft load when installing.
○ It should be ensured that the difference between the encoder shaft and the user's output shaft is less than 0.20mm, and the deflection angle to the axis is less than 1.5°.
○ Try to avoid knocks and hits during installation
○ Do not connect the power cord to the ground wire reversely.
○ The grounding wire should be as thick as possible, generally greater than φ3.
○ Do not overlap the output wires of the encoder to avoid damage to the output circuit.
○ Do not connect the signal wire of the encoder to a DC power supply or AC current to avoid damage to the output circuit.
○ The motor and other equipment connected to the encoder should be well grounded and free of static electricity.
○ Use shielded cables when wiring.
○ Before starting up, you should carefully check whether the product manual matches the encoder model and whether the wiring is correct.
○ For long-distance transmission, signal attenuation factors should be considered, and an output mode with low output impedance and strong anti-interference ability should be selected.
○ Avoid using in strong electromagnetic wave environment.
▋ Warranty conditions
Under the condition that the user abides by the component storage and use rules, within 12 months from the date of leaving the factory, the company will repair or replace it free of charge due to product quality problems. The specifications in catalogs, manuals or technical data are subject to change without notice.
● Mechanical Dimensions
Präsentation
Weihai idencoder electronic technology co.,ltd.
dencoder ist ein technisches Unternehmen mit Sitz in Weihai City in der Provinz ShanDong, China, das professionelle Encoder-Lösungen für Hunderte von Unternehmen auf der ganzen Welt anbietet.
Unter dem Namen Weihai Idencoder Electronic Technology Co., Ltd. haben wir uns auf die Entwicklung, Produktion und den Vertrieb von industriellen Drehgebern spezialisiert. Unsere Hauptprodukte: A. Inkremental-Drehgeber; B. Programmierbare Inkremental-Drehgeber; C. Singleturn- und Multiturn-Absolut-Drehgeber mit Parallel-, SSI-, Modbus-, Profibus-, Canopen- und Profinet-Schnittstelle; D. Seilzug-Drehgeber; E. Handimpulsgeber
Unsere Dienstleistungen
Probleme für Kunden lösen, für Marketingbegleiter
Vorverkaufsdienst
Nach den tatsächlichen Bedürfnissen der Kunden zu bestimmen, das Modell und die Spezifikationen der Ausrüstung, sondern auch im Einklang mit den besonderen Anforderungen der Kunden Design Custom, und die Kunden mit einem perfekten Programm, wirklich bieten den Kunden eine zufriedenstellende und angemessene Produkte. Wir können auch trainieren unsere Kunden auf die einschlägigen technischen Anleitung, so dass sie bestimmte technische Allgemeinwissen und Wartung von Geräten Fähigkeiten zu meistern.
Umsatzverfolgung
Während des Verkaufsprozesses verfolgen wir stets den Produktions- und Lieferprozess der Bestellungen unserer Kunden und versuchen, den Produktions- und Lieferzyklus zu verkürzen, während wir gleichzeitig die Qualität unserer Produkte sicherstellen und auf die Qualität unserer Produkte achten.
Kundendienst
Als Antwort auf die Schwierigkeiten der Kunden verfügen wir über engagierte Kundendienstmitarbeiter, die in Einzelgesprächen die Probleme der Kunden lösen, bis der Erfolg eintritt. Sie sind dafür verantwortlich, den Kunden die richtigen Techniken für die Verwendung des Produkts zu vermitteln, um sicherzustellen, dass es in ihren Händen dauerhaft und langlebig ist.
Produktnachricht
Andere Produkte
Die Hauptprodukte von Idencoder Electronics sind absolute Drehgeber der mittleren bis oberen Leistungsklasse, mechanische Multiturn-Drehgeber für den Busbetrieb usw.
Adresse：Gebäude 1, North Zone, Zhongke Innovation Industrial Park, Jing District, Weihai City